FROMLIST: arm64: dts: qcom: monaco: Enable SDHCI storage support

arch/arm64/boot/dts/qcom/Makefile

@@ -55,6 +55,13 @@ dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk-camera-imx577.dtb
 monaco-evk-mezzanine-dtbs	:= monaco-evk.dtb monaco-evk-mezzanine.dtbo
 
 dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk-mezzanine.dtb
+
+monaco-evk-sd-card-dtbs := monaco-evk.dtb monaco-evk-sd-card.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-sd-card.dtb
+
+monaco-evk-emmc-dtbs := monaco-evk.dtb monaco-evk-emmc.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-emmc.dtb
+
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb

arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso

@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+        vreg_s2s: regulator-vreg-s2s {
+                compatible = "regulator-fixed";
+                regulator-name = "regulator-s2s";
+
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+        };
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l8a>;
+	vqmmc-supply = <&vreg_s2s>;
+
+	supports-cqe;
+
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+
+	pinctrl-names = "default", "sleep";
+
+	non-removable;
+
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "disabled";
+};
+
+&vreg_l8a {
+	regulator-min-microvolt = <2960000>;
+	regulator-max-microvolt = <2960000>;
+};

arch/arm64/boot/dts/qcom/monaco-evk-sd-card.dtso

@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+        vmmc_sdc: regulator-mmc-sdc {
+                compatible = "regulator-fixed";
+
+                regulator-name = "vmmc_sdc";
+                regulator-min-microvolt = <2950000>;
+                regulator-max-microvolt = <2950000>;
+        };
+
+        vreg_sdc: regulator-sdc {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vreg_sdc";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpios = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>, <2950000 0>;
+
+		startup-delay-us = <100>;
+        };
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vmmc_sdc>;
+	vqmmc-supply = <&vreg_sdc>;
+
+	pinctrl-0 = <&sdc1_state_on>, <&sd_cd>;
+	pinctrl-1 = <&sdc1_state_off>, <&sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	cap-sd-highspeed;
+	no-1-8-v;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+
+	status = "okay";
+};
+
+&sdhc1_opp_table {
+	opp-100000000 {
+		opp-hz = /bits/ 64 <100000000>;
+		required-opps = <&rpmhpd_opp_low_svs>;
+	};
+
+	opp-202000000 {
+		opp-hz = /bits/ 64 <202000000>;
+		required-opps = <&rpmhpd_opp_svs_l1>;
+	};
+};
+
+&tlmm {
+        sd_cd: sd-cd-state {
+                pins = "gpio11";
+                function = "gpio";
+                bias-pull-up;
+        };
+};

arch/arm64/boot/dts/qcom/monaco.dtsi

@@ -4530,7 +4530,6 @@
 
 			qcom,dll-config = <0x000f64ee>;
 			qcom,ddr-config = <0x80040868>;
-			supports-cqe;
 			dma-coherent;
 
 			status = "disabled";

arch/arm64/boot/dts/qcom/qcs8300-ride.dts

@@ -697,6 +697,7 @@
 	vmmc-supply = <&vreg_l8a>;
 	vqmmc-supply = <&vreg_s4a>;
 
+	supports-cqe;
 	non-removable;
 	no-sd;
 	no-sdio;